3 Best Welding Schools in New York, NY

Welding Schools in New York, NY

Finding a job that pays well is not that easy.

However, if you work as a welder, you can make that happen and more.

In New York, NY, the average base salary of a welder is $35.34 per hour.

That rate is 62% higher than the national average.

Even with only a couple of years of experience in the field, a welder in NY can take home around $32 to $33 per hour.

And, with 10+ years of experience, that figure can go up to $40 to $65 per hour.

Do you think it is time for you to make a career change and switch to welding?

You should get welding education and training first.

The list below contains some welding schools in New York, NY that you might want to check out.

1 Apex Technical School

About the School

Apex Technical School is a vocational-technical school for adults established in 1961.

They offer hands-on training in various skilled trades to give their students basic knowledge and skills to be ready for entry-level positions in their chosen fields.

Licensed by the New York State Education Department and accredited by the Accrediting Commission of Career Schools and Colleges, they are also a nonprofit organization.

They are committed to creating plenty of opportunities for those facing economic barriers and supporting them to reach their full potential.

From automotive service and electrical and advanced electrical to refrigeration and welding technology, their certificate courses are designed to meet the demands of today’s employers.

They are accredited by the Accrediting Commission of Career Schools and Colleges and licensed by the New York State Education Department.

They are also a member of the Coalition of New York State Career Schools and Career Education Colleges and Universities.

Courses Offered

The Combination Welding Technology Program is a career training course that was first introduced in 1979.

Its goal is to teach students the essential information and techniques to land entry-level positions in the field of welding.

It features the following areas:

  • Gas and electric welding processes
  • Manual and automatic cutting techniques
  • Blueprint reading for metal layout and fabrication

Day and evening classes are available, and they combine in-classroom instruction and shop practice.

Upon successful completion, graduates are expected to show competencies in the following:

  • Reading blueprints
  • Trade mathematics
  • Oxyacetylene welding, cutting, and brazing
  • Basic shielded metal arc welding (SMAW)
  • Gas metal arc welding (GMAW)
  • Gas tungsten arc welding (GTAW)
  • Advanced shielded metal arc welding (SMAW)

The program requires a total of 900 hours and can be completed in about 7 months.

AddressAddress: 11-05 44th Dr, Queens, NY 11101, United States

2 School for Cooperative Technical Education

About the School

The School for Cooperative Technical Education offers vocational programs that provide hands-on training in different in-demand trades.

For more than 30 years now, they have been teaching a diverse student population that comes from a wide variety of cultural and ethnic backgrounds, educational histories, and ability levels.

They encourage their students to join the Work Based Learning Program of the Department of Education to learn job readiness skills, CPR, basic safety and OSHA procedures, and real-world work experience and exposure.

With the help of their outstanding faculty and staff, they are committed to giving their full support as their students seek internship opportunities, create their portfolios, and broaden their skill set for future employment.

Courses Offered

The Welding Course is included in the Construction and Building Skills Program.

By providing theoretical and hands-on experience, it aims to give students the necessary knowledge and skills to perform entry-level tasks and offer their assistance to expert trades professionals.

Its curriculum covers the following:

  • Entry-level gas and electric welding skills
  • Blueprint reading
  • Shielded Metal Arc Welding
  • Gas Metal Arc Welding
  • Gas Tungsten Arc Welding
  • Flux Cored Arc Welding
  • Oxy-Fuel Cutting
  • Plasma Arc Cutting
  • Fabrication

Upon successful completion, students can earn various NYS Certifications and Licenses, such as:

  • Department of Transportation 4g Welder Certification (Overhead) for unlimited thickness carbon steel
  • NYS Department of Transportation 3G Field Welder Certification (Vertical-Up) for unlimited thickness carbon steel
  • FDNY F60 Certification of Fitness (Fire Guard for Torch Operations)
  • FDNY G60 Certification (Torch Use of Flammable Gases)

AddressAddress: 321 E 96th St, New York, NY 10029, United States

3 Long Island Welding School

About the School

The Long Island Welding School has been in business since 1976.
From the start, they have always had the welder in mind.

They have recognized the need for a school that provides high-quality welding education for everyone who wants to learn so they have been serving their communities for decades now.

With classes that consist of only 6 to 7 students at a time, they believe that they can provide better and more personal instruction.

Taught by American Welding Society(AWS) Certified Welding Educators, their classes involve a mix of classroom theory, working in an actual welding facility, and handling real welding machinery and equipment.

They specially train on the AWS Curriculum because they want to help their students become successful in the welding industry.

They are also an American Welding Society Accredited Test Facility, one of the only two on Long Island.

Courses Offered

The Welding Program offers different courses for different welding knowledge and skill levels.

Basic Welding Course:

  • Perfect for beginners or anyone without welding experience
  • Covers the Principles of SMAW, GMAW, and TIG, Welder Settings, Wire Selection, Gas Selection, and Safety
  • Consists of 6 consecutive 4-hour classes and requires 24 total hours
  • Costs $2,750

Intermediate Welding Course:

  • A continuation of the basic course
  • Consists of 6 consecutive 4-hour classes and requires 24 total hours
  • Costs $2,750

Advanced Welding Course:

  • Designed as a preparation course for an experienced welder who wants to advance their welding career
  • Consists of 6 consecutive 4-hour classes and requires 24 total hours
  • Costs $2,750

Class schedules for all courses are as follows:

  • Monday: 8 am to 12 pm
  • Wednesday and Thursday: 8 am to 12 pm and 12:30 pm to 4:30 pm
  • Saturday: 8 am to 12 pm

AddressAddress: 59a Urban Ave, Westbury, NY 11590, United States

Schools Summary Table

Rank School
#1 Apex Technical School
#2 School for Cooperative Technical Education
#3 Long Island Welding School

USA Welding Schools by City

USA Welding Schools by State

Leave a Comment