by 
Utah takes its mechanical systems and machines seriously, making sure the maintenance technicians in charge of upkeep and repair know their stuff.
If you have ever worked somewhere that has large machinery that is necessary for daily activity, you have most likely come into contact with a maintenance technician.
Also, if you have had someone come out to make sure your HVAC system was ready for the upcoming heat or cold, you have come into contact with one of these individuals.
Without maintenance technicians, the world would become a lot less productive.
Article Table of Contents
- 1 Steps to Becoming a Maintenance Technician in Utah
- 2 Licensing Requirements for Maintenance Technicians in Utah
- 3 Maintenance Technician Programs in Utah
- 4 How Much Does a Maintenance Technician in Utah Make?
- 5 Frequently Asked Questions
- 5.1 Why does Utah require all maintenance technicians to have a valid driver's license?
- 5.2 How much money can a maintenance technician in Utah make on average?
- 5.3 Who issues the licenses and exemptions for maintenance technicians in Utah?
- 5.4 Where can I find training as a maintenance technician in Utah?
- 5.5 Are there times when you don't need to have a license as a maintenance technician in Utah?
Steps to Becoming a Maintenance Technician in Utah
1. Get a High School Education
You will need to have either a high school education or a GED for any position.
Showing a particular skill in science and math will increase your chances, so take advanced classes if you can.
2. Vocational Training Program
Seek out a vocational program in an area such as HVAC, electrical systems, plumbing, or welding.
A guidance counselor can help you decide what course is best for the area you wish to work in.
3. Apprenticeship
Seeking an apprenticeship will allow you to gain both hands-on experience as well as help you determine what areas you may have a special interest or affinity for.
4. Specialize
If you feel drawn to it and want to gain a chance at higher salaries, you can get a specialization certificate in one or more areas.
5. Get a Driver’s License
Utah requires all maintenance technicians to have a valid driver’s license that is also free of any points against it.
Licensing Requirements for Maintenance Technicians in Utah
Utah takes licensing its maintenance technicians seriously.
If you work on a project under $1000, you can do so without any license or permission.
If the job, materials, and labor are between $1000 and $3000, you need to register for an exemption with the Utah Division of Occupational and Professional Licensing (DOPL).
For higher-value jobs, you will need to get your license from the same bureau.
In addition, independent maintenance technicians may need a valid driver’s license, a business license and insurance, and bond insurance.
Maintenance Technician Programs in Utah
Utah State University
This school offers a certificate in Industrial Mechanics/Maintenance.
The course takes 18 credit hours.
Residents pay $4390, and non-residents pay a total of $12,829.
Upon completion, you will be prepared to take the Journeyman test.
Welding classes include Shielded metal arc welding, beginning gas metal arc welding, beginning gas tungsten arc welding, and print reading for welders.
Machine classes include Machine Tool Technology I, II, III, IV, and V, Special Problems, and Metallurgy.
You will also need to complete Industrial Mechanics I and II, Quantitative Reasoning, Technical Math, and Trigonometry.
Utah Valley University
This 18-month course includes beginner’s tools and earns you an Associate’s degree.
It is a Maintenance technician program and costs a total of $3095 for the 250 class hours.
By the time you complete the course, you will know all that is possible about grinding, CNC, electrical systems, electrical instruments, fasteners, hydraulics and pneumatica, inspections, Lean, manual machining, materials, mechanical systems, metal cutting, PLCs, quality control, rigging, robotics, safety, applied mathematics, supervising, and welding.
You have the option of also including labs and simulations.
Southern Utah University
The Aircraft Maintenance technician at this school is considered to be the most up-to-date one in the country.
Graduates find positions all over the world, and at the end of your 18 months, you will have your Associate’s degree and be eligible for Powerplant and Airframe certification.
Just a few of the subjects covered in this course are:
- Drawing, Blueprint, and Schematic Comprehension
- Aircraft Weight and Balance
- Human Factors in Aviation
- Application of Math and Physics to Aviation
- Basic Electrical Rotocraft Fundamentals
- Landing Gear Systems
- Hydraulic and Pneumatic Systems
- Aircraft Fuel Systems
- Flight Controls
- Ice and Rain Control
- Propellers
- Turbine Engine Inspection
- Reciprocating Engine Systems
| School Name | Address |
|---|---|
| Utah State University | 4100 Old Main Hill, Logan, UT 84322-0001 |
| Utah Valley University | 800 W University Pkwy, Orem, UT 84058, United States |
| Southern Utah University | 351 W University Blvd, Cedar City, UT 84720, United States |
How Much Does a Maintenance Technician in Utah Make?
At an average rate of $25.73 per hour, Utah maintenance technicians are about even with the rate throughout the country.
Entry-level usually starts at $12.47 an hour, and the higher end of the scale is $39.17 an hour.
The amount of money a maintenance technician makes is affected by where they work, such as residential or industrial, how much experience they have, whether they work for an organization or independently, and whether or not they are a general maintenance technician or specialist.
Annual Salary Range:| Location | Avg. Annual Salary |
|---|---|
| Salt Lake City | $59,787 |
| West Valley City | $50,536 |
| West Jordan | $52,075 |
| South Jordan | $41,937 |
| Sandy | $48,634 |
| Herriman | $52,032 |
| Millcreek | $50,974 |
| Taylorsville | $48,660 |
| Murray | $46,727 |
| Draper | $49,058 |
Salary by Metro Area in Utah
| Metro Area | Employed | Avg. Annual | Avg. Hourly | Top 10% | Bottom 10% |
|---|---|---|---|---|---|
| Logan, UT-ID | 690 | $49,300 | $23.70 | $69,150 | $30,710 |
| Ogden, UT | 2,370 | $54,000 | $25.96 | $76,330 | $33,810 |
| Provo-Orem-Lehi, UT | 2,560 | $50,400 | $24.23 | $72,490 | $31,990 |
| St. George, UT | 850 | $45,700 | $21.97 | $66,970 | $29,430 |
| Salt Lake City-Murray, UT | 6,200 | $53,810 | $25.87 | $76,780 | $35,980 |
* Employment conditions in your area may vary.
Frequently Asked Questions
Why does Utah require all maintenance technicians to have a valid driver's license?
Very often, a maintenance technician in Utah must travel between work sites.
Having a good driving record and a valid driver’s license is necessary to make sure this transition is possible.
In addition, some types of equipment or a work truck are involved, and a valid license is needed for such.
How much money can a maintenance technician in Utah make on average?
At an average rate of $25.73 per hour, Utah maintenance technicians are about even with the rate throughout the country.
Entry-level usually starts at $12.47 an hour, and the higher end of the scale is $39.17 an hour.
The amount of money a maintenance technician makes is affected by where they work, such as residential or industrial, how much experience they have, whether they work for an organization or independently, and whether or not they are a general maintenance technician or specialist.
Who issues the licenses and exemptions for maintenance technicians in Utah?
In Utah, you need to contact the Utah Division of Occupational and Professional Licensing (DOPL) in order to get a license or get an exemption for lesser monetary projects.
Where can I find training as a maintenance technician in Utah?
Most community colleges or vocational/technical schools in Utah offer programs that can prepare you for a position as a maintenance technician.
Seek out a vocational program in an area such as HVAC, electrical systems, plumbing, or welding.
Are there times when you don't need to have a license as a maintenance technician in Utah?
Yes, for jobs where the parts and labor are less than $1000, you do not need a license.
You also don’t need to have a license for jobs with a monetary value of $1000 to $3000, but with these, you must register for a license exemption.
This may require you to show proof that you have the experience necessary to complete the proposed job.
Read the full guide: How to Become a Maintenance Technician
Maintenance Technician by State